All devices
LS Elektronik Gateway

LS Elektronik Mimer X-Link MK2

Radio gateway that links an airband radio, or a VHF, UHF, DMR or TETRA radio, to a push-to-talk talk group through a PoC radio, with audio and PTT passed both ways.

Key facts

Device type
Gateway
Bridges
Airband, analogue VHF and UHF, DMR, TETRA, MPT, APCO 25 and PoC radios
Radio ports
2 (Radio A and Radio B)
Power
12 V DC, max 0.3 A
Size
130 x 120 x 30 mm
Request a briefing
Overview

Overview

The Mimer X-Link MK2 from LS Elektronik AB in Sweden is a radio gateway that makes a permanent patch between two radio systems. One radio from each system connects to the interface. All audio received on one radio is retransmitted on the other radio, and the other way round, so users on both systems talk to each other directly without a PC or an operator in between.

The maker lists airports first among its markets and names airband channels linked with ground channels at an airport as a typical use. Supported combinations include airband to ground, analogue VHF to UHF, analogue to DMR, analogue to TETRA, TETRA to DMR, MPT to DMR, TETRA to APCO 25, radio to PA system and radio to PoC. For a push-to-talk link, an existing airband or VHF/UHF radio is connected on one port and a PoC radio logged into the talk group on the other.

The gateway contains no radio of its own. It detects incoming traffic from a squelch or receive-detect output, from PEI data on TETRA radios or from the audio level, and keys the other radio over an active-low PTT line. Audio gain is set separately for each direction in 3 dB steps, and all audio ports have isolating transformers. Settings are made once with a Windows tool over USB; after that the unit runs on its own.

LS Elektronik supplies ready cable kits for common radios, among them the Icom IC-A110 and IC-A120 airband radios and the Telox M6 vehicle unit, and delivers interfaces pretuned for known radio types. The interface measures 130 x 120 x 30 mm and runs on 12 V DC at up to 0.3 A, and a rack-shelf version with power supply is available. EMC conformity is declared to ETSI EN 301 489-3. No air traffic control certification is stated by the maker.

Specification

Specification

LS Elektronik Mimer X-Link MK2 Manufacturer data

General

Product
Mimer X-Link MK2 Interface, article 3350
Maker
LS Elektronik AB, Sweden
Composition
Mimer X-Link consists of a small interface box and two cable kits
Function
All audio that comes in on one radio is retransmitted on the other radio and vice versa
Operation
Stand alone system, when set up, it runs by itself
Radio types
Handles analogue radios as well as digital radios; uses the PEI port on TETRA radios
Markets
Airports, Public Safety, Harbours, Borders, Industry

Bridged systems

Combinations named by the maker
Analogue VHF to UHF; Airband to ground; Analogue to a DMR; Analogue to a TETRA; TETRA to a DMR; TETRA to TETRA; MPT to DMR; TETRA to APCO; Radio to PA-system; Radio to PoC
Airport use
Airband channels together with ground channels at an airport

Radio ports and control

Radio ports
2 (Radio A, Radio B)
Radio connector
15-pin D-sub, on the cable kit
PTT output
Active low
Receive detection
Squelch or PL-detect input (active low or active high), PEI data on TETRA radios, or audio level detection
TETRA PEI
RS232 or 5 V TTL serial, selectable baud rate
Timers
PTT on filter delay and PTT off hold delay, adjustable

Audio

Isolation
All audio ports have transformers to avoid disturbances
Gain
Separate for each direction (radio A to B, B to A), adjusted in 3 dB steps
Processing
A microcontroller handles the Rx detection, PTT and the amplifying levels

Configuration

Software
X-Link configuration tool for Windows
Port
USB connection to a PC
Delivery
Interfaces for well-known radio types are delivered pretuned

Cable kits

Ready cable kits
Kits for most radio types, plus open-end cables for other radios and audio sources
Examples
Kit 3363 for Icom IC-A110 and IC-A120 airband radios; cable 3427 for the Telox M6 vehicle unit

Power

Supply
12 V DC, max 0.3 A, through red and black leads

Physical

Dimensions
130 x 120 x 30 mm
Mounting
Rack-shelf setup with power supply available

Compliance

EMC
ETSI EN 301 489-3 V2.1.1; EN 55032 class B; ETSI EN 301 489-1; EN 61000-4-2, -3, -4 and -6

Source: manufacturer product page

Request a briefing

Talk to Tactiron about this device.

A briefing covers device choice and provisioning for the platform.

Request a briefing

Make an enquiry

Send a question to the Tactiron team. We reply to the email address you give.

All fields are required unless marked optional.